Cast Iron Ingot Single Mould (Medium)

Description

Cast Iron Medium Ingot Single Mould

Unlike some ingot moulds these have been designed with a smooth acute taper on the side walls to allow ingot to be easily released.

The handles are for tipping the ingot out using tongs. Prior to use the ingot mould can be coated with delta cast mould release or mould blacking

Ingot moulds are for making ingots after melting down scrap or when too much metal has been smelted.

New Ingot moulds should be slowly pre-heated over 4 hrs in a furnace or kiln to drive off moisture. Moulds should be pre heated before every use to prevent Shock cracking prior to pouring molten metal into them.

Made by SDTS Engineering from High Quality Cast Iron at our own foundry.

Ingot dimensions L 9″x W 2 1/4″x D 2 1/2″

Supplied Individually

Please note the ingots moulds are made to order and may take up to 3 weeks to manufacture.

Discounts on multiple orders
Please Contact us to find out more.

Picture is for illustrative purposes only

Additional information