Cast Iron Large Ingot Single Mould
£95.99
- Description
- Additional information
- Reviews (0)
Description
Cast Iron Large Ingot Single Mould
Unlike some ingot moulds these have been designed with a smooth acute taper on the side walls to allow ingot to be easily released.
The handles are for tipping the ingot out using tongs. Prior to use the ingot mould can be coated with delta cast mould release or mould blacking
Ingot moulds are for making ingots after melting down scrap or when too much metal has been smelted.
New Ingot moulds should be slowly pre-heated over 4 hrs in a furnace or kiln to drive off moisture. Moulds should be pre heated before every use to prevent Shock cracking and remove moisture prior to pouring molten metal into them.
Made by SDTS Engineering from High Quality Cast Iron at our own foundry.
This product is to only be used for non ferrous metals and mould blacking must be used to prohibit adhesion to the iron.
Ingot dimensions L10″ x W2 1/4″ x D 2 1/2″
Supplied Individually
Discounts on multiple orders
Please Contact us to find out more.
(All cast products are made in our own foundry in the UK)
Please note this product is made to order and usually takes up to 2 weeks to manufacture depending upon work load.
Pictures are for illustrative purposes
Additional information
Weight | 3.9 kg |
---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.